TM 11-6660-200-14
5-22.
WIND DIRECTION TRANSMITTER SYNCHRO ZEROING.
PRELIMINARY PROCEDURE: Remove transmitter center section (para 5-16).
1.
Remove three screws (1) and lockwashers (2).
2.
Remove two screws (3) and lockwashers (4).
3.
Mark vertical support (5) in alinement with N on vane shaft housing (6).
CAUTION
Push connector (7) up from bottom of vertical support (5) to prevent breaking wires or damaging
connector.
5-30
Previous Page
