TM 11-6660-218-12
Figure 24. Reel and jack hookup for communications.
until the resistance measures less than
apart, into the ground to a depth of 1
1,000 ohms.
meter.
(4) Connect the grounding stakes to the
water can with straps or wire. Personnel
(3) Measure the resistance with an ohm-
actually handling the balloon should be
meter between the two rods. The re-
grounded by a strap for discharge of a
sistance should be less than 1,000 ohms;
static buildup (figs. 25 and 25 ).
if the resistance is more add as many
I
(5) Deleted.
rods as needed at 1.5-meter intervals
2-7
Change 8
Previous Page
