TM 75053
ML605/U
Wrench, open end, 5/16 and 3/8 in.
Inflation nomograph _ _ _ _ Inflation volume graph,
Wrench, open end, 11/16 and in.
can be interpreted
Wrench, plier, 7 in. nom size.
within cu ft.
Screwdriver 1/8 in. wide, 5 in. long.
Recording device _ _ _ _ Registers balloon vol-
Screwdriver 3/16 in. wide, 5 in. long.
umes 19999.9 cu. ft.
Key, sockethead screw 0.050 in.
Dimensions of case _ _ _ _ 36 in. high, 36 in. deep,
Punch, drive pin, 1/16 in. dia.
36 in. wide.
Wrench, octagonal, 2 in. open.
Weight of case and components _ 57 lb.
b. Test Equipment. None.
7. MAJOR COMPONENT:
11. REFERENCE DATA AND LITERATURE:
TM 11666024515, 25P
ML605/U
8. SET, SYSTEM, FACILITY, AND CONFIGURATION
ML594/U
TM 11666023815, 25P
APPLICATIONS:
TM 11666021812, 25P AN/TMQ4
This unit is used with Balloon Inflation and Launching
Device ML594/U in a fast-riser balloon system.
12. REPAIR PARTS SUPPORT CAPABILITY:
To 1974--Full support.
9. ADDITIONAL EQUIPMENT REQUIRED AND AUX-
ILIARY EQUIPMENT:
13. TRAINING REQUIREMENTS:
a. Additional Equipment.
Operator MOS 93E20, 93F20.
Maintenance MOS35C20.
Hydrogen Regulator ML193.
14. TYPICAL BASIS OF ISSUE:
Coupling ML49.
Allowance
TA
Hose ML81.
M7W04SAA _ _ _ _ _ _ _ _ _ _ _ _ _ 1
Balloon Inflation and Launching Device ML594/U.
______________ 6
5AW2NTAA
Meteorological balloon.
b. Auxiliary Equipment. None.
15. PRICE DATA.
10. TOOLS AND TEST EQUIPMENT:
16. ITEM REPLACED: None.
a. Tools.
Screwdriver (spcl).
17. REMARKS: None.
178