TM 11-6660-200-14
4-5.
UNPACKING. (CONT)
UNPACKING OF SUPPORT
1.
Cut metal straps (1) and remove from crate.
2.
Pry crate cover (2) up and remove.
3.
Remove packaged support (3) from crate.
4.
Remove packaging (4) from support.
5.
Cut metal straps (5) and remove support (6) and hardware (7).
4-6.
CHECKING UNPACKED MATERIEL.
Check the AN/GMQ-11 for damages from shipment. If it has been damaged, report the damage on SF 364 (Report of
Discrepancy (ROD)).
Check all parts against the packing list. If the packing list is not available, refer to the Basic Issue Items (Bll) List in
Check to see if equipment has been reconditioned or modified. If modified, the Modification Work Order (MWO) number
will be on or near nomenclature plate.
4-4
Previous Page
