TM 11-6660-200-14
Section II SERVICE UPON RECEIPT
Subject
Para
Page
General.................................................................................................................................................
Unpacking ............................................................................................................................................
Checking Unpacked Materiel ...............................................................................................................
Assembly of Support and Mast ............................................................................................................
Transmitter Assembly...........................................................................................................................
Indicator Assembly ...............................................................................................................................
4-4.
GENERAL.
This section explains what must be done upon initial receipt of equipment. Procedures appear in the order in which they
must be performed.
Contents are first removed from crates and packing cartons and checked against packing list for any discrepancies.
Contents are also checked for damage that might prevent equipment from performing its mission. If minor discrepancy or
damage is found that will not effect the operation of the equipment, put equipment into service. Report your findings on SF
Form 361, Discrepancy in Shipment Report (DISREP) and forward as prescribed by AR 55-38, Reporting of Transportation
Discrepancies in Shipments. If no discrepancies or damages are found, proceed with component assembly.
Resources required are not listed unless they apply to the procedure.
Personnel are listed only if the task requires more than one technician.
Radio Repair Tool Kit TK-17/FMQ-1 is used for all procedures.
Procedures apply to all models unless otherwise specified.
4-5.
UNPACKING.
WARNING
Wear heavy gloves, protective eye wear, and stand to side when cutting metal straps. Do
not handle packing cartons using metal straps.
4-2
Previous Page
