TM 11-6660-200-14
4-7.
ASSEMBLY OF SUPPORT AND MAST.
ASSEMBLING SUPPORT LEGS
NOTE
There are three support legs. Steps given are typical for all three.
1. Position long brace (1), spacer (2), and short brace (3) in mast base (4), and install screw (5), lockwasher (6), and
nut (7). Hand tighten.
2. Repeat step 1 for two remaining mast bases.
3. Position other end of short brace (3) between two clamps (8), and install screw (9), lockwasher (10), and nut (11).
Hand tighten.
4. Repeat step 3 for two remaining short braces.
5. Position other end of long brace (1) between two clamps (12), and install screw (13), lockwasher (14), and nut (15).
Hand tighten.
6. Repeat step 5 for two remaining long braces (1).
4-5
Previous Page
