TM 11-6660-200-14
5.17.
TRANSFORMER T201 REPLACEMENT. (CONT)
INSTALLATION
CAUTION
Care must be taken when installing transformer to prevent damaging light switch.
1.
Place transformer (14) under bracket (15) and install four nuts (12) and lockwashers (13).
CAUTION
Use heat sink pliers on lugs when soldering wires.
NOTE
For correct soldering, refer to TB SIG 222.
2.
(8) to lug (9), and grey wire (10) to lug (11).
3.
Install front panel (3) on indicator case.
4.
Install four screws (1) and washers (2).
5-23
Previous Page
