TM 11-6660-200-14
5-17.
MATERIALSIPARTS:
1.
Remove four screws (1) and washers (2), and remove front panel (3) from indicator case.
NOTE
For correct soldering methods, refer to TB SIG 222.
2.
Using soldering iron, unsolder two green wires (4) from lug (5), red wire (6) from lug (7),
brown wire (8) from lug (9), and grey wire (10) from lug (11).
3.
CAUTION
Care must be taken when removing transformer from front panel to prevent damaging
light switch.
4.
Remove transformer (14).
5-22