TM 11-6660-200-14
4-36.
PREPARATION FOR STORAGE OR SHIPMENT. (CONT)
DISASSEMBLING SUPPORT ASSEMBLY
1.
Loosen three screws (1) and nuts (2) on upper clamps.
2.
Loosen three screws (3) and nuts (4) on lower clamps.
3.
Remove mast assembly (5) from support legs (6) by lifting out of top of upper and lower clamps.
4.
Remove compression nut (7), rubber bushing (8), and washer (9) from lower mast section (10).
5.
Remove upper mast section (11) by pulling out from bottom of lower mast section (10).
6.
Install washer (9), rubber bushing (8), and compression nut (7) to prevent loss.
7.
Remove four lag bolts (12) from each of the three mast bases (13).
4-51
Previous Page
