TM 11-6660-200-14
4-36.
PREPARATION FOR STORAGE OR SHIPMENT. (CONT)
REMOVING TRANSMITTER FROM CONNECTOR HOUSING
PERSONNEL REQUIRED: Two technicians
PRELIMINARY PROCEDURE: Tilt support assembly (para 4-12).
CAUTION
Do not lift transmitter by tail or impeller; lift transmitter by center section only.
1.
Remove four screws (1) and lockwashers (2).
CAUTION
Do not twist transmitter while removing to prevent bending pins on connector P1.
2.
Lift transmitter (3) and gasket (4) off of connector housing (5).
4-46
Previous Page
