TM 11-6660-200-14
4-30.
GENERATOR COVER REPLACEMENT.
MATERIALS/PARTS: Wind direction and speed cover, NSN 6660-00-469-6681
PRELIMINARY PROCEDURE: Remove impeller (para 4-29).
NOTE
Steps given are typical for all models.
REMOVAL
1.
Remove three screws (1) and lockwashers (2).
2.
Remove shield (3).
3.
Remove generator cover (4) by pulling straight off generator (5).
INSTALLATION
1.
2.
Install shield (3) and aline holes.
3.
Install three screws (1) and lockwashers (2).
FOLLOW-ON MAINTENANCE: Install impeller (para 4-29).
4-31.
TRANSMITTER SUPPORT REPLACEMENT.
NOTE
If damage to transmitter support occurs, first determine which component is damaged and needs replacement. If
repairs can be done, do the repair only if it will extend the useful life of the equipment. If replacement is
necessary, see paragraph 4-7 for a detailed explanation of procedures.
4-42
Previous Page
