TM 11-6660-200-14
5-6.
DIAL LAMPHOLDER REPLACEMENT.
MATERIALSIPARTS:
NOTE
There are seven dial lampholders, five have four wires connected and two have two wires
connected. Steps given are typical for all seven.
REMOVAL
1. Loosen four turn-lock fasteners (1) and remove rear cover (2).
NOTE
For correct soldering methods, refer to TB SIG 222.
3. Squeeze both lampholder spring tabs (5) together and pull lampholder (6) out of dial
socket (7).
4. Press in on lamp (8), turn counterclockwise, and pull lamp out of lampholder (6).
INSTALLATION
NOTE
For ease of soldering wires, install lampholder in dial socket.
1. Squeeze both lampholder spring tabs (5) together, push lampholder (6) into dial socket (7),
and release lampholder spring tabs.
5-6