FUSE HOLDER REPLACEMENT.

TM-11-6660-200-14 Wind Measuring Set AN/GMQ-11 Manual
Page Navigation
79

TM 11-6660-200-14

5-8.

FUSE HOLDER REPLACEMENT.

MATERIALS/PARTS:

Fuse holder, NSN 5920-00-244-5150

REMOVAL

Remove four screws (1) and washers (2) and remove front panel (3) from case.

Press in fuse cap (4) and turn counterclockwise.

Remove fuse cap (4) with fuse from fuse holder (5).

NOTE

For correct soldering methods, refer to TB SIG 222.

Using soldering iron, unsolder purple wire (6) and black wire (7).

Remove, nut (8) and washer (9) and remove fuse holder (5) from front panel (3).

INSTALLATION

Install fuse holder (5) into front panel (3).

Install washer (9) and nut (8).

Using soldering iron, solder purple wire (6) to center lug (10) and black wire (7) to side

lug (11).

Install fuse cap (4) with fuse in fuse holder (5) and turn clockwise.

Install front panel (3) on case and install four screws (1) and washers (2).

5-9

Index