TM 11-6660-200-14
5-9.
WINDSPEED INDICATOR REPLACEMENT.
MATERIALS/PARTS:
Gasket, NSN 6660-00-582-7149 (if needed)
Arbitrary scale meter, NSN 6660-00-620-7870
REMOVAL
1.
Remove four screws (1) and washers (2) and remove front panel (3) from indicator case.
2.
Remove nuts (4) and orange wire (5) from M or K terminal and brown wire (6) from +
terminal.
NOTE
There are three dial lampholders. Step 3 is typical for all three.
3.
Squeeze both lampholder spring tabs together and pull lampholder (7) out of dial socket.
5-10
Previous Page
