REMOVAL - TM-11-6660-200-140090

TM-11-6660-200-14 Wind Measuring Set AN/GMQ-11 Manual
Page Navigation
85

TM 11-6660-200-14

5-12.

WINDSPEED GENERATOR FILTER FL1 OR CAPACITOR C1 REPLACEMENT. (CONT)

REMOVAL

Remove two screws (1), flat washers (2), lockwashers (3), nuts (4), and insulator (5).

Remove two screws (6), lockwashers (7), and generator holder (8).

NOTE

For correct soldering methods, refer to TB SIG 222.

Using soldering iron, unsolder two white wires (9) and two black wires (10).

Remove four screws (11), lockwashers (12), gasket (13), cover plate (14), and

retainer (15).

Remove filter (16) from generator (17).

INSTALLATION

Place filter (16) bracket on generator (17).

Install retainer (15), gasket (13), and cover plate (14).

Install four screws (11) and lockwashers (12).

NOTE

For correct soldering methods, refer to TB SIG 222.

Using soldering iron, solder two white wires (9) to lug (18) and two black wires (10) to

lug (19).

Install generator holder (8) on generator (17).

Install two screws (6) and lockwashers (7).

Place insulator (5) and brush assembly (20) on bracket (21).

Install two screws (1), flat washers (2), lockwashers (3), and nuts (4).

FOLLOW-ON MAINTENANCE: Install windspeed generator G1 (para 5-10).

5-15

Index