TM 11-6660-200-14
4-15. TRANSMITTER ALINEMENT.
1. Using clamp (1), secure a straightedge (2) on machined surface (3) of connector
housing (4).
NOTE
If wind direction is to be indicated to true north (instead of magnetic north), refer to
station reference data for local declination (angle between true and magnetic north at a
particular site). Use compass to establish magnetic north.
2. Loosen compression nut (5) and turn upper mast section (6) so straightedge is in line with
north reference selected and pipe plug (7) (or conduit cable connection) is facing south.
3. Tighten compression nut (5) to hold upper mast section (6) in place.
4-21
Previous Page
