TM 11-6660-200-14
4-11.
MOUNTING SUPPORT ASSEMBLY.
NOTE
For siting of equipment, see paragraph 2-3.
1. Set support (1) on mounting platform (2) and, using level or plumbline, make sure support mast (3) is vertical.
2. If support mast (3) is not vertical, place shims of proper thickness under lowest mast base (a to make support
mast vertical.
3. Using four lag bolts (5) for each of the three mast bases (4), secure mast bases to platform (2).
4. Recheck that support mast (3) is still vertical. If not, perform step 2 until support mast is vertical.
4-16
Previous Page
