TM 11-6660-266-13
g. Install NAVAID Antenna Set as follows:
(1) Install tripod (6) as follows:
(a) Remove tripod from case #7.
(b) Unbuckle leg strap and spread legs until leg
support cable (7) is tight.
(c) If necessary, level tripod as follows:
(1) Hold tripod in approximate level
position to determine which leg(s)
require adjustment.
(2) Loosen appropriate leg adjustment
knob (8) by turning counterclockwise.
(3) Slide leg extension (9) down until leg
extension comes in contact with
ground.
(4) Tighten leg adjustment knob (8) by
turning clockwise.
2-29
Previous Page
